Answer Happy

We will achieve the first stage of amplifier and study its frequency response The frequency response will be ready in the next Friday. In this first stage, R-R_20kA, R.-5.2522, 1-0.5mA, Ro-28.6 ko You will see 01 and Q2 Drain DC voltage is 10v. Difference gain is 23 26 re-025 R. - 1042Tolkn Avd- 5,21140 0.2 · 23 RO 고 -15 V Assume V... 0.7V.B-100 Multistage Differential Amplifier mm 2: Prototyping and measurement Assemble the circuit onto your breadboard using the specified component values and those just calculated. • DC measurement: measure DC voltage at emitter of Q1 and Q2 • AC measurement: measure and display each stage AC output and AC input voltage. • Frequency response: we will see how gain changes with frequency. We will use various frequency to see gain response. Hope we can get frequency response curve, which is gain vs frequency. We will need to find upper-3dB frequency which you will see midband gain reduced by vz 3.Simulation Simulate the circuit and use simulation in writy your design and