Page 1 of 1
An accelerometer is interfaced to a RX63N microcontroller as on the figure 1.1. PE2 PES PE4 Xis Yaxis Zaus Accelerometer
Posted: Mon May 09, 2022 6:12 am
by answerhappygod
- An Accelerometer Is Interfaced To A Rx63n Microcontroller As On The Figure 1 1 Pe2 Pes Pe4 Xis Yaxis Zaus Accelerometer 1 (38.97 KiB) Viewed 23 times
An accelerometer is interfaced to a RX63N microcontroller as on the figure 1.1. PE2 PES PE4 Xis Yaxis Zaus Accelerometer RX63N Figure XOSN oferece 10 aeroe 1. Which ADC and channels is the accelerometer interfaced to? (5 marks) On the RX62N the ADC can be setup in single chamel mode, continuous scan and single scon mode. 2. We want a sampling rate of 500 Hz on the 3 channels for an indefinite amount of time. Which mode would be the most appropriate and why? 5 marks) 3. List the different ADC registers that need to be configured (7 marks) 4 Configure the ADC registers listed in Q3 so it has the following functionalities 500Hs sampling rate Mocedented in 012 Interrupt enabled Teggered by software Datsun ADC operating cock should be Cautare 10-400 operating and con 15 tark