24. A complete mixed activated sludge system with recycle is used to treat flow from a roughing filter (4.2 MGD). The in
Posted: Sun May 08, 2022 9:05 pm
Pls answer fast i will rate u up
24. A complete mixed activated sludge system with recycle is used to treat flow from a roughing filter (4.2 MGD). The influent BODs into the activated sludge system is 92 mg/L and the required effluent is 10 mg/L. The MLSS concentration is 2800 mg/L and is 80% volatile. The HRT of the system is 1.2 hours and a recycle ratio of 0.5 is used. The temperature in the winter of the activated sludge system is 13 C and controls the design. The kinetic constants are given as follows: Ks = 55 mg/L at 20 C 'max = 3.7/day at 20 C ke = 0.05/day at 13C Y = 0.6 lb MLVSS/Ib BODs What is the MCRT in days required for this tank to achieve the desired effluent concentration (answer to the nearest tenth of a dav)?
24. A complete mixed activated sludge system with recycle is used to treat flow from a roughing filter (4.2 MGD). The influent BODs into the activated sludge system is 92 mg/L and the required effluent is 10 mg/L. The MLSS concentration is 2800 mg/L and is 80% volatile. The HRT of the system is 1.2 hours and a recycle ratio of 0.5 is used. The temperature in the winter of the activated sludge system is 13 C and controls the design. The kinetic constants are given as follows: Ks = 55 mg/L at 20 C 'max = 3.7/day at 20 C ke = 0.05/day at 13C Y = 0.6 lb MLVSS/Ib BODs What is the MCRT in days required for this tank to achieve the desired effluent concentration (answer to the nearest tenth of a dav)?