The section of a clayey slope is shown in Figure 1. Assuming a trial circular slip surface BED with arc radius of 11.65
Posted: Sun May 08, 2022 8:38 pm
The section of a clayey slope is shown in Figure 1. Assuming a
trial circular slip surface BED with arc radius of 11.65 m,
determine whether this is a stable slope. The area of the section
BCDEF is 85 m2 and the centroid of the section is
located at point G as shown in the figure.
The average unit weight of the soil is 18.2 kN/m2. The
shear strength of the soil above and below the level of line ABE is
cu = 22 kN/m2 and cu = 35 kN/m2,
respectively.
1 1 77 6.25 2.45 A Figure 1
trial circular slip surface BED with arc radius of 11.65 m,
determine whether this is a stable slope. The area of the section
BCDEF is 85 m2 and the centroid of the section is
located at point G as shown in the figure.
The average unit weight of the soil is 18.2 kN/m2. The
shear strength of the soil above and below the level of line ABE is
cu = 22 kN/m2 and cu = 35 kN/m2,
respectively.
- The Section Of A Clayey Slope Is Shown In Figure 1 Assuming A Trial Circular Slip Surface Bed With Arc Radius Of 11 65 1 (7.66 KiB) Viewed 14 times