A specification for bolt diameters has an upper limit of 10.42mm and a lower limit of 10.24mm. The process is stabilized
Posted: Sun May 08, 2022 4:22 pm
A specification for bolt diameters has an upper limit of 10.42mm
and a lower limit of 10.24mm. The process is stabilized but not
centered at the specification mean. The process width is 0.18mm
with a mean of 10.32mm. What is the process capability ratio?
0.94
0.56
0.75
0.67
0.71
0.89
0.84
and a lower limit of 10.24mm. The process is stabilized but not
centered at the specification mean. The process width is 0.18mm
with a mean of 10.32mm. What is the process capability ratio?
0.94
0.56
0.75
0.67
0.71
0.89
0.84