Please try to do this as quick as possible thank you!
Posted: Thu May 05, 2022 6:15 pm
Please try to do this as quick as possible thank you!
A pole is connected to the wall with a ball and socket joint and is also supported by two cables. The weight of the pole is 60 lb. Forces F1 and F2 are applied to the pole at point D. F1 is +100j lbs, and F2 is -300k lbs. (a) Draw the free body diagram of the pole (you do not need to include dimensions), make a list of all of the coordinates for each point, and write your assumptions. (b) Write the full set of equilibrium equations for the pole. (c) Solve for the tension in the cables CG and DF and for the reaction forces at A. The two cables are separate. Set up an Augmented Matrix from the equations in part b and use MatLab or equivalent to find the unknown forces. Alternatively, you may use substitution. Show the results as magnitudes.
FL 3 ft 2 ft 3 ft Z 2 ft 3 ft G W O 1.5 ft 1 ft 1.5 ft F2 AH F1 1.5 Note: The pole is angled down directly below the y-axis, i.e., x = 0 for pts A, B, C, and D. 2 ft y
- Please Try To Do This As Quick As Possible Thank You 1 (44.65 KiB) Viewed 41 times
- Please Try To Do This As Quick As Possible Thank You 2 (22.94 KiB) Viewed 41 times
FL 3 ft 2 ft 3 ft Z 2 ft 3 ft G W O 1.5 ft 1 ft 1.5 ft F2 AH F1 1.5 Note: The pole is angled down directly below the y-axis, i.e., x = 0 for pts A, B, C, and D. 2 ft y