Page 1 of 1
Question # 3(25 Marks) Cross section of a beam is shown in Figure 3. If a shear force V=100 kN is applied to the beamn,
Posted: Thu May 05, 2022 5:57 pm
by answerhappygod
- Question 3 25 Marks Cross Section Of A Beam Is Shown In Figure 3 If A Shear Force V 100 Kn Is Applied To The Beamn 1 (63.25 KiB) Viewed 23 times
Question # 3(25 Marks) Cross section of a beam is shown in Figure 3. If a shear force V=100 kN is applied to the beamn, find out the shear stress in the flange of the beam at point B. B 1023 0.02m o-lom A 0.30m Figure Question 3 Question # 4(25 Marks) The copper pipe as shown in Figure Question 4 has an outer diameter of 45 mm and an inner diameter of 40 mm. If it is tightly secured to the wall and three torques are applied to it, determine the maximum and minimum shear stress developed in the pipe. 30 Nm 20 N ON m Figure Question 4 NX 0.10m C 0.015m