A solid circular pole is subjected to linearly varying distributed force with maximum intensity q0 at the base and an ax
Posted: Thu May 05, 2022 5:43 pm
A solid circular pole is subjected to linearly varying distributed force with maximum intensity
q0
at the base and an axial compressive load P at the top (see figure).
Find the required diameter d of the pole (in mm) if the maximum allowable normal stress is 150 MPa. Let
q0 = 8.1 kN/m,
P = 56 kN,
and
L = 8 m.
(Assume that the bending moments are not affected by the presence of lateral deflections.)
MY NOTES ASK YOUR TEAC A cold orcular pole is subjected to Inwarty varying died force with mamum intensity of the ta axial comprave Find the rend diameter of the pole ( mm) if the maximum allowable normal stress ss 150 MPs. Let 3-36 - (Assume that the bending moments are not affected by the pream of tal deffections) www Darbe
q0
at the base and an axial compressive load P at the top (see figure).
Find the required diameter d of the pole (in mm) if the maximum allowable normal stress is 150 MPa. Let
q0 = 8.1 kN/m,
P = 56 kN,
and
L = 8 m.
(Assume that the bending moments are not affected by the presence of lateral deflections.)
MY NOTES ASK YOUR TEAC A cold orcular pole is subjected to Inwarty varying died force with mamum intensity of the ta axial comprave Find the rend diameter of the pole ( mm) if the maximum allowable normal stress ss 150 MPs. Let 3-36 - (Assume that the bending moments are not affected by the pream of tal deffections) www Darbe