A double reduction gear train is required to drive a load at approximately 400rpm from a motor running at 3000rpm. A st
Posted: Thu May 05, 2022 5:38 pm
A double reduction gear train is required to drive a load at
approximately 400rpm from a motor running at 3000rpm. A
standard compound gear is to be used, made up of two gears of 20
and 50 teeth fixed on a common shaft. Calculate the number of teeth
required on the output gear.
approximately 400rpm from a motor running at 3000rpm. A
standard compound gear is to be used, made up of two gears of 20
and 50 teeth fixed on a common shaft. Calculate the number of teeth
required on the output gear.