Page 1 of 1
Q3. Using Mohr's circle determine: (a) The theoretical direction of the failure planes in a triaxial test specimen. (b)
Posted: Wed May 04, 2022 8:59 am
by answerhappygod
- Q3 Using Mohr S Circle Determine A The Theoretical Direction Of The Failure Planes In A Triaxial Test Specimen B 1 (34.97 KiB) Viewed 37 times
Q3. Using Mohr's circle determine: (a) The theoretical direction of the failure planes in a triaxial test specimen. (b) The critical depth of the vertical cutting shown on the Figure Q3-1. (c) The stresses acting on the back of the retaining wall in Figure Q3-2 at a depth of 2.4 m (assuming soil at failure). (d) The stresses acting at the bottom of the bulldozer blade shown in Figure Q3-3. G.L Derit Saturated Clay Xsat 18 kN/m² Q=33kN/m² 2₁-0 12 kN/m² Bulldozer Blade Movement 15⁰ 15° Figure Q3-1 Sand Ysat 20 kN/m² c'= 0 Ⓒ = 30° Figure Q3-2 Loose Sand 8= 20 kN/m² c'= 0 -30° W.L. U=0 Figure Q3-3 G.L G.L. 2.4m 1m