If the shear stress at an angle of 56 degrees through the cross section of a timber beam (width 46 mm x breadth 46 mm) i
Posted: Wed May 04, 2022 8:45 am
If the shear stress at an angle of
56 degrees through the cross section of
a timber beam (width 46 mm x breadth
46 mm) is 50 MPa, what
is the axial tensile force applied
in kN?
56 degrees through the cross section of
a timber beam (width 46 mm x breadth
46 mm) is 50 MPa, what
is the axial tensile force applied
in kN?