A wooden salad bowl can be approximated as follows. The sides can be approximated as a hollow cylinder with an outside r
Posted: Mon May 02, 2022 4:44 pm
A wooden salad bowl can be approximated as follows. The sides can be approximated as a hollow cylinder with an outside radius of 170 mm, an inside radius of 90 mm, a height of 110 mm, and a mass of 1.9 kg. The bottom can be approximated as a disc that fits inside the cylinder with a thickness of 20 mm and a mass of 0.9 kg. Determine the mass moment of inertia of the salad bowl about a vertical axis through the center. 0.0457 kg-m' A. Format Check 10 (include units with answer)
Two forces P, and P2 act at distances X1 and x2 from the center of a merry-go- round as shown. The magnitude of the angular acceleration of the merry-go- round is measured to be 1.8 rpm per minute. Determine the mass moment of inertia of the merry-go-round. P1=590 N, P2=330 N X1=3.2 m, x2 = 7.0 m 8.88 J E. P P2 Format Check 20 pts. 100 Unit mismatch 10% try penal 10 try limit * X2 View looking down from the top (include units with answer)
Two forces P, and P2 act at distances X1 and x2 from the center of a merry-go- round as shown. The magnitude of the angular acceleration of the merry-go- round is measured to be 1.8 rpm per minute. Determine the mass moment of inertia of the merry-go-round. P1=590 N, P2=330 N X1=3.2 m, x2 = 7.0 m 8.88 J E. P P2 Format Check 20 pts. 100 Unit mismatch 10% try penal 10 try limit * X2 View looking down from the top (include units with answer)