Design a Zone substation with the following specifications 1) The substation proceeds for power evacuation of a 22 MW lo
Posted: Mon May 02, 2022 4:34 pm
Design a Zone substation with the following specifications
1) The substation proceeds for power evacuation
of a 22 MW load Center including single and three-phase
residential and industrial Consumers respectively.
2) It connects 2 nos 230 kV, Lins, to the distribution
Systems
3) Design all the protection schemes for
transformers,
transmission lines, and radial feeders. Consider the lead
the center is 2 km away from the substation and the
transmission/distribution lines are standard AAA cables.
4) configure the specification for all the CT and PT used
for the substation.
5) The substation should include a double bus bar facility
and
some overlapping protection schemes.
1) The substation proceeds for power evacuation
of a 22 MW load Center including single and three-phase
residential and industrial Consumers respectively.
2) It connects 2 nos 230 kV, Lins, to the distribution
Systems
3) Design all the protection schemes for
transformers,
transmission lines, and radial feeders. Consider the lead
the center is 2 km away from the substation and the
transmission/distribution lines are standard AAA cables.
4) configure the specification for all the CT and PT used
for the substation.
5) The substation should include a double bus bar facility
and
some overlapping protection schemes.