Page 1 of 1
A thin-walled steel structure has a cross-section with non-uniform wall thickness, as shown in Figure 3. There is a slot
Posted: Mon May 02, 2022 3:42 pm
by answerhappygod
- A Thin Walled Steel Structure Has A Cross Section With Non Uniform Wall Thickness As Shown In Figure 3 There Is A Slot 1 (256.73 KiB) Viewed 43 times
A thin-walled steel structure has a cross-section with non-uniform wall thickness, as shown in Figure 3. There is a slot at A in the structure. The shear modulus of steel is 80 GPa. When a torque of 5 kN.mm is applied on the thin-walled structure, determine the maximum shear stress and twisting angle per unit length of the structure. R35 A 80 21 100 Dimension unit: mm