Answer Happy

Could you help me answer this steel structure analysis questionnaire?
1. Indicates the types of failure indicated in the figure below
2. Identify the ultimate limit states applicable to the connection shown below. Fully justify your answer.
2. Identify the ultimate limit states applicable to the connection shown below. Fully justify your answer.
3. In what cases should slip-critical connections be used? 4. Indicates the easiest and most economical method of tightening the bolts in a connection and in what order the bolts should be tightened. 5. Indicate whether the following statement is true or false: "A490 galvanized screws should be used to prevent corrosion on the screws." 6. If you were called to inspect the following connection, would you consider the connection to be adequate and why? 7. Do the markings shown on the splice bolts in the web of the next beam indicate that each bolt passed inspection? If not, what do those marks indicate?
3. In what cases should slip-critical connections be used?
4. Indicates the easiest and most economical method of tightening the bolts in a connection and in what order the bolts should be tightened.
5. Indicate whether the following statement is true or false: "A490 galvanized screws should be used to prevent corrosion on the screws."
6. If you were called to inspect the following connection, would you consider the connection to be adequate and why?
7. Do the markings shown on the splice bolts in the web of the next beam indicate that each bolt passed inspection? If not, what do those marks indicate?
7. Do the markings shown on the splice bolts in the web of the next beam indicate that each bolt passed inspection? If not, what do those marks indicate?
8. Is it true that full penetration welds are generally the cheapest? 9. Name at least three factors on which the slip resistance of a slip-critical connection depends. 10. Explain the possible failure modes in the specimen shown in the figure
8. Is it true that full penetration welds are generally the cheapest?
9. Name at least three factors on which the slip resistance of a slip-critical connection depends.
10. Explain the possible failure modes in the specimen shown in the figure
1 SL T2B 8 OB 5 4 3 2