Answer Happy

Question 1 A cantilever beam AB of length 10m carries a point load of 175 kN as shown in figure 1. Calculate the slope (in degrees) and vertical deflection (in mm) at end B. Take E = 17.5 GPa and the beam cross section is 400mm wide by 1250mm deep. 175 KN 6m A B 10m Figure 1 Question 2
A beam section shown in figure 4b is subjected to the direct and moment forces listed below. Calculate the stresses at the 4 corners. The forces applied on the section are as follows: Mz = -95kNm My = +55kNm Axial force = 180kN [8 marks] у a b 72 500mm 'd 300mm Figure 4b