Scenario:
Your organization is deploying the ASA CX software module in the ASA which connects the organization's internal network to the Internet. A colleague has configured the policy on the CX module itself. Your task is to configure the ASA to forward the appropriate traffic to the CX module for processing.
Currently there are no policies configured for the inside interface. Your goal is to match all traffic which traverses the inside interface using the system default class, and send that traffic to the CX module. The CX will use active authentication. Also in the event of a CX module failure, no traffic should be allowed.
Access to the console of the ASA by clicking on its icon in the topology map. The enable password is Cisco!23. Use inside-policy as the name of the policy map that you configure. After you have successfully applied the policy map to the inside interface, verify that it is active using an appropriate show command.
- Simulation Scen 1 (24.19 KiB) Viewed 76 times
- Simulation Scen 2 (24.78 KiB) Viewed 76 times