The following configuration steps have been completeD. ✑ WebVPN was enabled on the ASA outside interface. ✑ SSL VPN cl

[answerhappygod]

The following configuration steps have been completeD.
✑ WebVPN was enabled on the ASA outside interface.
✑ SSL VPN client software was loaded to the ASA.
✑ A DHCP scope was configured and applied to a WebVPN Tunnel Group.
What additional step is required if the client software fails to load when connecting to the ASA SSL page?

A. The SSL client must be loaded to the client by an ASA administrator
B. The SSL client must be downloaded to the client via FTP
C. The SSL VPN client must be enabled on the ASA after loading
D. The SSL client must be enabled on the client machine before loading