You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remote site, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set of commands for this configuration?
A. R1(config)# controller t1 1/0 R1(config-controller)# framing esf R1(config-controller)# linecode b8zs R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B. R1(config)# controller t1 1/0 R1(config-controller) # linecode hdb3 R1(config-controller) # framing crc4 R1(config-controller) # clock source line R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
C. R1(config)# isdn switch-type primary-5ess R1(config)# controller t1 t1/0 R1(config-controller) # pri-group timeslots 1-24
D. R1(config)# controller t1 1/0 R1(config-controller) # framing esf R1(config-controller) # linecode b8zs R1(config-controller) # clock source line R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start D
You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remote site, and you need to co
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remote site, and you need to co
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!