You are establishing a ClusterXL environment, with the following topology: VIP internal cluster IP = 172.16.10.3; VIP ex

[answerhappygod]

You are establishing a ClusterXL environment, with the following topology:
VIP internal cluster IP = 172.16.10.3; VIP external cluster IP = 192.168.10.3
Cluster Member 1: 4 NICs, 3 enableD. hme0: 192.168.10.1/24, hme1: 10.10.10.1/24, qfe2: 172.16.10.1/24
Cluster Member 2: 5 NICs, 3 enabled; hme3: 192.168.10.2/24, hme1: 10.10.10.2/24, hme2: 172.16.10.2/24
External interfaces 192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same VLAN switch. Internal interfaces
172.16.10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the synchronization network. The Security Management Server is located on the internal network with IP 172.16.10.3. What is the problem with this configuration?

A. The Cluster interface names must be identical across all cluster members.
B. Cluster members cannot use the VLAN switch. They must use hubs.
C. The Security Management Server must be in the dedicated synchronization network, not the internal network.
D. There is an IP address conflict.