A diving watch must be immersed in seawater from a diving vessel. Three divers and various equipment is in the clock. Th

[answerhappygod]

A diving watch must be immersed in seawater from a diving
vessel. Three divers and various equipment
is in the clock. The diving watch can be modeled as a closed steel
ball with
wall thickness 50 mm.
Other data: Outer diameter of the watch: 2.5 m
Lots of various equipment inside the watch: 1100 kg
Mass for each diver w / personal equipment: 100 kg
Steel density: 7.8 103
kg / m3
Water density: 1.025 103
kg / m3
a) Find weight in air and weight in water for the diving watch with
divers and equipment under condition
that it is gas-filled.
b) Estimate hydrodynamic mass (“Added mass”) and total dynamic mass
for the diving watch.
(Same conditions as for point a).
c) The diving bell is exposed to a horizontal current of 20 cm / s
at the relevant water depth. Calculate
"Traction" (flow resistance) this will give on the diving
watch.